Customized products and OEM

It is possible to change the range of motion of one or more axis and/or change dimensions of the central aperture (up to 160 x 110 mm). We can provide nanopositioning stage with 10 to 500 microns range of motion on X, Y, Z.

Most of our products can be customized to create the best solution for your application.

 

EXAMPLE OF OEM CUSTOMIZED PRODUCTS

Z-axis stage inserts

  • Up to 500μm ranges of motion

  • Customized dimensions and mounting (inserts are possible)

  • Custom aperture sizes

  • Higher resolution and lower cost than competition

  • Custom sample holders

Objective lens nanopositioners

  • Higher ranges of motion

  • FEA designed to produce exceptionally low off-axis error

Long range, multi-axis nanopositioners for microscopy

  • Ranges of motion up to 500μm

  • Super large aperture (105 mm x 105 mm possible)

  • High resolution

  • Low height stages for convenient sample placement

  • Customized dimensions and mounting hole

Our process is the following. We will need information regarding your exact requirements such as:

  • Number of axis

  • Travel range on each axis

  • Size of the aperture

  • Space restriction

  • Speed requirement (type of signal, frequency)

  • Mass of the sample to be moved

  • Environment (vacuum, humidity, temperature, magnetic field, etc, )

  • USB interface or analogue controller needed (OEM electronics are also available)

Then, based on  this information, we will design your system by using the Finite Element Analysis (FEA) method to find the best compromise to match your needs.

Finally, we will send you the specifications of the customized product, a 3D image and a technical drawing.

For large quantity OEM, we generally send a prototype stage to validate the design which we offer.